SMALL PHONE
PHONE
TABLET
DESKTOP
LARGE DESKTOP
XL DESKTOP

How to change your motorcycle oil

Person cleaning dirty hands after working on a motorcycle in garage
January 27, 2021

The motor is the heart of your motorcycle and motor oil is its lifeblood. Oil lubricates your bike's internal parts and carries away combustion contaminants to be cleaned and collected by the oil filter. Through this process, oil flow also helps cool internal parts, like camshafts and stators—some motorcycles even use oil as a primary coolant.

The motor is also the single most expensive system to repair or replace on your motorcycle.

Preventive maintenance is critical to keeping your ride healthy and vibrant. Oil and filter changes are the cheapest investments you can make in motorcycle maintenance. One way to keep the cost down is to do it yourself.

Changing the motor oil and filter isn't a hard job, and when done properly, it's not messy. As an added bonus, it'll help you learn about the condition of your motor. Doing this service is a rite of passage for some riders. It'll empower you to be more involved in keeping up with your motorcycle maintenance.

Save money by changing your motorcycle oil yourself

Let's break down the costs involved in a typical oil and filter change.

First, the materials—this job requires multiple quarts of oil, a filter, and more than likely, a crush washer or O-ring to seal the oil drain plug.

Then, there's the labor. Labor costs for an oil change can add up quickly, especially when it involves other services, like checking the brakes. A mechanic's time is money. Expect about an hour of labor unless you're told otherwise upfront.

Changing your oil yourself is a great way to keep your cost down. You can even inspect brake pads or lube-critical components—items on the maintenance schedule—while the oil drains. By doing maintenance yourself, you could save on:

  • Motorcycle oil: $6 to $20+

  • Motorcycle oil filters: $11 to $20+

  • Crush washers or O-rings: $1 or less

  • Hourly labor rate: Varies by location and if it's at a dealership versus an independent shop—$100 is common

Research the type of motorcycle oil you need

Before you change your oil, make sure you know what type of motorcycle oil you should use for your bike. There are a few things you need to know:

Oil grade (viscosity)

The oil grade is the measure of its thickness and is sometimes expressed as a weight (e.g. 50-weight). A lower viscosity number translates to thinner oil.

Oils come in two basic formulations: single grade and multi grade. Single-grade oils have one viscosity and are rarely recommended. You may hear a rider claim they run straight 50-weight oil in their chopper when riding to Sturgis. Don't take this as advice for your factory motorcycle. The reason for that rider's logic is that all oils thin as they heat up. However, when thinned too much, they lose their protective lubrication quality.

Multi-grade oils have two numbers separated by a W-, which stands for winter. A 20W-50 multi-grade oil will function as 20-weight in colder temperatures, but won't get thinner than 50-weight at full operating temperature. Oil additive technology yields easy starts on cold mornings while still providing necessary viscosity at full throttle.

You can find the appropriate viscosity grade and rating standard for your ride in your owner's manual or factory service manual. Note that there are often different recommended viscosity grades for seasons of colder or hotter average ambient temperatures. You should always use oil that meets or exceeds the manufacturer's recommendation for the conditions you ride in.

Motorcycle oil type

Next, you need to know the type of oil your motorcycle was designed for—mineral oil, semi-synthetic oil, or full synthetic oil.

Old-school mineral oil is typical for older motorcycles; however, you may be able to upgrade to semi-synthetic oil or full synthetic oil. Some high-mileage motorcycles may weep synthetic oil, but this is typically a gasket problem, not an oil problem. On the flip side, some older motors can run smoother and leak-free on synthetic oil, so it really depends on your bike. Synthetic oils do offer longer service life and less frequent oil changes. If your motorcycle was designed for synthetic oil, there's no benefit to using mineral oil—it could lead to excess wear and void your warranty.

There are a few factors to consider when shopping for oil:

  • Some motorcycles have separate lubricants for motor, primary drive, and transmission, while others use a single oil to lubricate all three.

  • Some motorcycles have a wet clutch and the motor oil must play well with the friction it causes.

Determine how to choose an oil that works for all your bike's parts by reading your owner's manual or factory service manual.

Common industry oil standards

The American Petroleum Institute (API) standard is expressed by a two-letter code, sometimes followed by a number. The first letter represents the type of internal combustion engine the oil is rated for.

  • Gasoline engine-rated oils start with an S, representing spark ignition

  • Diesel engine-rated oils start with a C, representing compression ignition

While your motorcycle uses gasoline as fuel, some motorcycles need the performance qualities of diesel motor oil. The second letter represents the standard that the oil meets—letters further down the alphabet are newer standards. For example, API-CP is a newer standard than API-CN. Beginning with API-SJ, these oils were primarily designed for cars and light trucks and aren't suitable for motorcycle use due to friction modifiers in the additive package that can adversely affect wet clutch performance.

Many of these evolving standards have to do with additive packages, automobile fuel economy, and tailpipe emissions. Motorcycle oils can be rated API-SG and higher, with the caveat they must be labeled for motorcycle engines.

The Japanese Automotive Standards Organization (JASO) has a classification standard—JASO-MA—specifically designed for motorcycles that run a wet clutch. JASO-MA2 is a similar standard for higher friction characteristics. All JASO-MA oils are expected to meet at least one of the following API standards: API-SG, -SH, -SJ, -SL, -SM.

Motor oils are a very competitive product category and there are a few brands that have a loyal following. Prices can vary, but that doesn't mean high prices equal the best oil for your motorcycle. You need an oil that meets or exceeds the manufacturer recommendations and fits your riding style. Lots of riders are willing to share their experiences with different motorcycle oils and share them on internet forums and places like our Facebook page.

Schedule your motorcycle oil changes

You can find a maintenance schedule for your motorcycle in the owner's or service manual. It's vital to follow the mileage intervals for changing the oil and the filter—which should always be changed at the same time. Oil filters can only remove so much contamination before they too are exhausted.

These intervals are intended to maintain optimal performance and a long service life for your motor. View the schedule as a firm commitment to your motorcycle and not as a flexible recommendation. If you don't ride enough miles in a season for an oil change, consider changing your oil and filter before winter storage to protect the motor from corrosion. There's no harm in changing the motor oil and filter more frequently than the maintenance schedule, which you might do to prepare for a long tour. Make sure you keep track of the mileage when you make the change.

How do I keep track of my motorcycle oil changes?

  • The owner's manual may provide pages with a special service records form where you can record dates, mileage, and details on the oil and filter you used.

  • You can also use any commercially available shop service record book on the market to keep track of motorcycle oil changes.

  • Your phone or other mobile device likely has a spreadsheet program where you can design your own recordkeeping form.

Get the tools and materials to change your motorcycle oil

Changing your oil and filter doesn't require many tools or materials. You can purchase the oil and filter locally or online. An oil change kit may be available, which will have the necessary amount of oil for your bike, a filter, and potentially, some recycling materials.

Tools

  • Ratchet wrench

  • Six-point socket of the correct size for your drain plug and cartridge filters*

  • Open-end wrench of the correct size for your drain plug and cartridge filters*

  • Oil filter wrench for external cartridge filters—choose one based on the access to the filter on your motorcycle

  • Torque wrench (optional)

  • Oil catch pan

  • Work light

*Avoid 12-sided sockets and wrenches—they're more likely to round off bolts over time.

Materials

  • Nitrile or latex gloves

  • Plastic container for recycling the used oil—a rinsed laundry detergent container works well

  • Cardboard large enough to fit under your oil catch pan with some extra coverage to protect the floor from oil splashes and drips

  • Sealable plastic bag large enough to hold the used oil filter

  • Clean shop rags that you're willing to dispose of after the service

  • Aluminum foil

  • Aerosol carburetor cleaner

Follow these 10 steps to change your oil

Now that you know the basics of oil and what you'll need to change your oil and filter, here's how you do it:

Prep your tools

  • While your motorcycle is cold, locate the motor oil drain plug and oil filter and verify you have the correct size sockets and wrenches for both.

  • If the motorcycle has a center stand, check the manual to see if the oil change is to be done on the side stand or center stand.

  • With the motorcycle on the correct stand, check the clearance of your oil catch pan under both stands.

  • Ensure you have everything you need to complete the oil and filter change, including a well-lit and well-ventilated work area with enough room to work on the bike from all sides.

Warm up your engine

Once you're sure you have everything you need, take your motorcycle for a 10-minute ride to warm the motor to full operating temperature—you might need more time if it's very cold outside. Park the motorcycle in the work area on the correct stand. While the exhaust is cooling, arrange all your tools and supplies for easy access. Put on your nitrile or latex gloves.

Drain your old oil

After the exhaust system has cooled enough to touch, unplug the dipstick or look at the sight glass to check the oil level and the condition of the old oil. If the motorcycle has a sight glass, remove the filler cap.

Arrange your cardboard floor protector and place the oil catch pan under the drain plug. Use the ratchet wrench to break the drain plug loose, turning counterclockwise until it feels like you can turn it with your fingers. Remove the wrench. The oil catch pan should be positioned now so that the oil, which will pour forward a few inches, will land in the pan. At this point you should finish removing the plug with gloved hands. Be ready to get your hand and the plug out of the way—the oil will probably still be hot. Set the plug aside without wiping it off.

Once you're sure the oil is going into the pan, inspect the drain plug. Oil drain plugs usually have magnets to collect metal shavings that settle in the oil tank. Small amounts are normal on break-in oil changes. If you find a lot of metal shavings or bits on the plug, save them to show to your mechanic—this could be a sign something is wrong. Let the oil drain to a slow drip. The more that comes out the better.

Remove your oil filter

While the last of the oil drains, consider using aluminum foil to cover anything under the oil filter so the motorcycle will stay clean when you remove the filter. Move the oil catch pan under the oil filter and use the filter wrench to turn the filter counterclockwise to break it loose. Continue to unscrew the filter by hand until it comes off—it'll have some oil in it. Set it upside down in the pan to drain. After the oil stops dripping from the filter mount, wipe the gasket-mating surface clean. Make sure there isn't an old gasket stuck to the mating surface.

If you have an internal cartridge oil filter, there should be a bolt head on the center of the cover. Remove this the same way you removed the drain plug. The only difference is it's typically under spring pressure. There may be several internal components, such as the spring, you'll need to take out. Keep track of the order you take them out.

Install a new filter

First, verify that the gasket-mating surface is clean. Then use a gloved finger to spread a thin coat of oil on the new filter's gasket. If the filter mounts vertically you can prefill it with oil, which helps with start-up lubrication. If it mounts horizontally, you may be able to add a few ounces of new oil, being careful not to put in so much that it spills during installation. Screw the filter on until finger tight, then tighten it three quarters to one full turn by hand—don't use a wrench. It's helpful to mark the filter with a grease pencil or a sharpie to help gauge the amount you tighten it.

Reinstall the drain plug

Remove the old crush washer or O-ring from the drain plug and wipe it clean, removing any metal particles. Install a new crush washer or O-ring and thread the bolt into the drain hole with only your fingers until it's finger tight. At this point you have the option to use a torque wrench to tighten the drain plug to the manufacturer's specified torque. Or you can use the open-end wrench to tighten the bolt until snug, using care to not overtighten it, as you'll need those threads for many more oil changes.

Fill your motorcycle with fresh oil

Using a funnel, slowly pour the oil into the filler hole. Most riders allow each just-emptied oil container a few moments to completely drain into the funnel. Remember to account for the volume of any oil you pre-filled the filter with. After you've added all the oil to the motor, install the dipstick or—on a sight-glass equipped bike—install the filler cap. Making sure you have adequate ventilation, start the motor and allow the bike to run for a few minutes while observing the filter and the drain plug for potential leaks. Turn the motorcycle off and give the oil a chance to settle into the tank and then check the level with the dipstick or the sight-glass.

Clean any residual oil off the motor

No matter how neat you are, there'll likely be a small amount of used motor oil on the underside of your motor, and possibly the frame or exhaust components. If left behind, it can burn and smoke, causing you unnecessary anxiety on your next ride. Your beautiful motorcycle deserves to be clean. Use shop rags and aerosol carburetor cleaner to wipe it clean. Don't spray anything on a hot engine and be sure there's adequate ventilation. Collect any runoff in the oil catch pan. Check again for any signs of leaks.

Test ride your bike and check your work

It's always a good idea to take the bike for a short test ride to warm the motor to full operating temperature. If the initial fill looked a little low, it's better to make sure that the oil has a chance to fully warm and circulate. Then, let it settle to perform a normal level check. Check again for any signs of leaks and top off as needed. Avoid overfilling—too much oil increases pressure and can harm the motor.

Recycle used oil and filter

Transfer the used oil to the storage container and bag the old oil filter. It's easy to recycle used oil and filters in most communities and is often free. Follow local guidelines on recycling the empty oil containers. Any oil-soaked rags or cardboard are flammable, so be sure to hang them in a safe place outdoors. After the oil is dry, completely soak with water. Pack them wet into a sealable can or bag and follow local guidelines for hazardous waste disposal—which is likely the same place you recycled the oil and filter.

Summary

There's a learning curve with motorcycle oil. Once you have the knowledge, it'll be easier to buy the best oil for your ride. Changing your motorcycle's oil is fairly simple mechanical task and after your first time, you'll be able to do it cleanly and easily.

Till next time, ride safe!

The general information in this blog is for informational or entertainment purposes only. View our blog disclaimer.

*Data accuracy is subject to this article's publication date.

Get insured
Auto